Jailbreaking is easy. Don't stress it!

Select your iOS firmware below and follow the instructions. I recommend you to chill with Weeknd below when you start because that’s how you should roll ūüôā¬†

Problems? E-mail at gunkaar.singh17@gmail.com.

  1. Download Pangu.
    Download Windows version  || Download Mac version 
  2. Download iTunes from here¬†and install it if you don’t have it already.
  3. Remove the passcode of your device.
  4. Open Pangu and plug in your device.
  5. Click on “Start Jailbreak”.
  6. Click on “Already Did”.
  7. Pangu will begin its magic, just wait and watch.
  8. You might get a “storage almost full” popup, it’s normal. Click done and wait for the process to be finished.
  9. When the process finishes, your device will restart. Wait for it to start completely.
  10. Done!

If it seems difficult, follow the video step-by-step below.

  1. Download TaiG Jailbreak.
    Download Windows Version || Download Mac Version
  2. Plug in your device.
  3. Run the app as administrator by right-clicking and selecting the option.
  4. It will load and display your phone. De-select 3K Assistant.
  5. Click on Start.
  6. The process will begin, wait & watch.
  7. Once the app shows “Jailbreak Successful!”, your device will reboot.
  8. Done!
 Easy video guide for the same! (Short 3-minute guide)

No jailbreak available.

Upgrade/Downgrade to some other firmware to jailbreak your device. 

  1. Download Pangu for Windows from here.
  2. Turn on Airplane mode and turn off Find my Device. Attach it to the computer.
  3. Right-click on the app and run as administrator.
  4. Pangu will detect your device. Click Start.
  5. Click on “Already Backup”.
  6. The process will start, wait for it to finish.
  7. Done!

Here’s the video guide for the same.¬†

It’s recommended that you watch it from 2:25. The links in the video description are broken so use the above one instead to download Pangu.

Since the tool is Chinese, I recommend you to follow the video tutorial thoroughly.


Tool Link: Download PPHelper for Windows 

Alternate Method:

Pangu.io has a method where you can get the IPA on your device which can used to jailbreak your device.

Instructions here.

Link is dead on the official site, so download the IPA from here.

What I recommend:

Pangu.io 

It is a secure method but I wanted to explore an easier way to achieve jailbreak, hence I posted alternative method as well.

No jailbreak available.

Upgrade/Downgrade to some other firmware to jailbreak your device.

This is the easiest jailbreak solution ever!

  1. Go to TotallyNotSpyware from your iOS 10 device.
  2. Slide the slider you see on the screen.
  3. Simply wait for the tool to do its magic.
  4. Done!

Note: Jailbreak is of semi-untethered nature, meaning you’ll have to re-do the procedure if your phone ever shuts down.

Worth it once you get the hang of jailbreaking! 

Personally tested on iPhone 6 and iPhone 7 with iOS 11.2 fimware. 

1) Download Matrix Store from here.

2) Download Unc0ver IPA from here.

3) Attach your device with your computer and start Matrix Store.

4) Drag that IPA file on the Matrix Store and hit Install.

5) It will ask for your Apple ID and Password. Don’t worry, it’s just to verify with Apple servers so that they can sign a certificate to install third-party applications on your device.

6) Wait while it installs on your device.

7) After it’s installed, disconnect your device and run Unc0ver app on your device.

8) Enable Airplane Mode, close rest of the apps and click “Jailbreak”.

9) Let it do it’s magic and reboot.

10) Done!

Matrix Store part seems too complicated? Watch the video below to install the required IPA:

Here’s the rest of the procedure c0vered (Watch from 2:54):

Note #1: Jailbreak is of semi-untethered nature, meaning you’ll have to re-do the procedure if your phone ever shuts down.

Worth it once you get the hang of jailbreaking!

Note #2: You might have to try jailbreaking using the app a few times if the procedure fails. Not the whole process, but just the part where you use Unc0ver on your phone to jailbreak.

Alternate Method: Checkra1n: Download here for Mac & Linux.

Here’s the Windows workaround for the same:

Same as iOS 11. 

1) Download Matrix Store from here.

2) Download Unc0ver IPA from here.

3) Attach your device with your computer and start Matrix Store.

4) Drag that IPA file on the Matrix Store and hit Install.

5) It will ask for your Apple ID and Password. Don’t worry, it’s just to verify with Apple servers so that they can sign a certificate to install third-party applications on your device.

6) Wait while it installs on your device.

7) After it’s installed, disconnect your device and run Unc0ver app on your device.

8) Enable Airplane Mode, close rest of the apps and click “Jailbreak”.

9) Let it do it’s magic and reboot.

10) Done!

Matrix Store part seems too complicated? Watch the video below to install the required IPA:

Here’s the rest of the procedure c0vered (Watch from 2:54):

Note #1: Jailbreak is of semi-untethered nature, meaning you’ll have to re-do the procedure if your phone ever shuts down.

Worth it once you get the hang of jailbreaking!

Note #2: You might have to try jailbreaking using the app a few times if the procedure fails. Not the whole process, but just the part where you use Unc0ver on your phone to jailbreak.

Note #3: If this method does not work for you, you can try the iOS 12-3 – 12.4.7 method here instead, it should work.

Personally tested on iPhone 5S with iOS 12.4.6 firmware.

  1. Download Checkra1n from here. It’s available for Linux and MacOS only. For Windows, use checkn1x here. Setup a bootable USB drive and boot into checkn1x.
  2. Disable passcode and attach your device to the computer with checkra1n open.
  3. Hit start. It will get your phone into recovery mode.
  4. Continue and it will ask you to put the phone in DFU mode. Follow the on-screen instruction to achieve so.
  5. The procedure will start. Wait for it to finish.
  6. Run the checkra1n app on your phone once your device starts.
  7. Done!

Tutorial seems too complicated? Just follow the video below step-by-step: 

Note #1:¬†Jailbreak is of semi-untethered nature, meaning you’ll have to re-do the procedure if your phone ever shuts down.

Worth it once you get the hang of jailbreaking!

Same as iOS 11 and iOS 12! 

1) Download Matrix Store from here.

2) Download Unc0ver IPA from here.

3) Attach your device with your computer and start Matrix Store.

4) Drag that IPA file on the Matrix Store and hit Install.

5) It will ask for your Apple ID and Password. Don’t worry, it’s just to verify with Apple servers so that they can sign a certificate to install third-party applications on your device.

6) Wait while it installs on your device.

7) After it’s installed, disconnect your device and run Unc0ver app on your device.

8) Enable Airplane Mode, close rest of the apps and click “Jailbreak”.

9) Let it do it’s magic and reboot.

10) Done!


Matrix Store part seems too complicated? Watch the video below to install the required IPA:

Here’s the rest of the procedure c0vered (Watch from 2:54):

Note #1:¬†Jailbreak is of semi-untethered nature, meaning you’ll have to re-do the procedure if your phone ever shuts down.

Worth it once you get the hang of jailbreaking!

Note #2: You might have to try jailbreaking using the app a few times if the procedure fails. Not the whole process, but just the part where you use Unc0ver on your phone to jailbreak.

Note #3: If this method does not work for you, you can try the iOS 13.5.1 method here instead, it should work.

NOTE: Does not work for devices released after iPhone X i.e iPhone XR, iPhone XS, iPhone 11 and the iPhone SE 2020.

Same as iOS 12.3 Р12.4.7! 

  1. Download Checkra1n from here. It’s available for Linux and MacOS only. For Windows, use checkn1x here. Setup a bootable USB drive and boot into checkn1x.
  2. Disable passcode and attach your device to the computer with checkra1n open.
  3. Hit start. It will get your phone into recovery mode.
  4. Continue and it will ask you to put the phone in DFU mode. Follow the on-screen instruction to achieve so.
  5. The procedure will start. Wait for it to finish.
  6. Run the checkra1n app on your phone once your device starts.
  7. Done!

Tutorial seems too complicated? Just follow the video below step-by-step: 

Note #1:¬†Jailbreak is of semi-untethered nature, meaning you’ll have to re-do the procedure if your phone ever shuts down.

Worth it once you get the hang of jailbreaking!